|
Component Description |
Qty |
Notes |
PCB Location |
Resistor 100R |
4 |
|
|
Resistor 4M7 |
2 |
|
|
Resistor 4k7 |
4 |
|
|
Resistor 100K |
2 |
|
|
Resistor 1M |
2 |
|
|
Resistor 56K |
2 |
|
|
Resistor 1K |
4 |
|
|
Resistor 22k |
4 |
|
|
Resistor 10k |
4 |
|
|
Resistor 330R |
4 |
|
|
Resistor 2k7 |
4 |
|
|
Resistor 470K |
2 |
|
|
Capacitor: 1.5nF 100V |
2 |
|
|
Capacitor: 100nF (0.1uF) 100V |
4 |
|
|
Capacitor: 10nF (0.01uF) 100V |
2 |
|
|
LDR |
2 |
|
|
LED Red |
2 |
|
|
LED Green |
2 |
|
|
LED Orange |
2 |
|
|
LED Blue |
2 |
|
|
Transistor: BC337 |
4 |
|
|
Piezo Disk:20mm 7812 |
1 |
|
|
Voltage Regulator: +5V: LM7805CT |
1 |
|
|
Switch Micro:62mm LEV 6.3mm QC V15 |
1 |
|
|
Switch Push:Tactile Button N.O. |
2 |
|
|
Trimpot and Shaft:470k |
1 |
|
|
Speaker beeper |
1 |
|
|
Speaker:25mm 8 Ohm |
1 |
|
|
Infrared Data Receiver:RPM6938 38kHz IR Sensor Z782636 |
1 |
|
|
Infra red diode: 5mm L-53F3BT |
1 |
|
|
Socket:IC 3 way Single inline PHSS03G1 |
2 |
|
|
Socket: DC power |
1 |
|
|
IC socket:4 pin SIL |
2 |
|
|
Socket: 10 Way SIP |
1 |
|
|
Motor: P9000 3V-12V |
1 |
|
|
Battery Holder:3x AA |
1 |
|
|
Cable Telephone: 0.4mm 3pr |
0.4 |
|
|
PCB posts:Nylon adhesive mtg 6.5mm |
4 |
|
|
Brown,Black,Black,Black. Bend leads by hand, at the body, so they are at right angles.
Yellow, Violet, Green. Bend leads by hand, at the body, so they are at right angles.
Yellow, Violet, Black, Brown. Bend leads by hand, at the body, so they are at right angles.
Brown, Black, Black, Orange. Bend leads by hand, at the body, so they are at right angles.
Brown, Black, Black, Yellow. Bend leads by hand, at the body, so they are at right angles.
Green, Blue, Black, Red. Bend leads by hand, at the body, so they are at right angles.
Brown, Black, Black, Brown. Bend leads by hand, at the body, so they are at right angles.
Red, Red, Black, Red. Bend leads by hand, at the body, so they are at right angles.
Brown, Black, Black, Red. Bend leads by hand, at the body, so they are at right angles.
Orange, Orange, Black, Black. Bend leads by hand, at the body, so they are at right angles.
Red, Violet, Black, Brown. Bend leads by hand, at the body, so they are at right angles.
Yellow, Violet, Black, Orange. Bend leads by hand, at the body, so they are at right angles.
Push pins into PCB one side at a time
If SIL socket has more than 4 pins, cut into groups of 4 pins using a sharp knife or small sharp side-cutters
For mounting the PCB onto a mounting plate.